In recent years, the high complexity of integrated devices has made heat accumulation increasingly critical and has resulted in higher heat dissipation requirements for substrates and packaging materials. In this study, boron nitride microribbon (BNMR)/Al2O3 composite ceramics are prepared using spark plasma sintering (SPS). This study examines the effect of varying the amount of toughened phase BNMR on the density, mechanical properties, dielectric constant, and thermal conductivity of BNMR/Al2O3 composite ceramics while also exploring the mechanisms behind the toughening and increased thermal conductivity of the fabricated ceramics.
A team of material scientists led by Ji-Lin Wang from Guilin University of Technology in Guilin, boron nitride microribbon (BNMR)/Al2O3 composite ceramics are prepared using spark plasma sintering (SPS). During the sintering process, the pliable BNMRs were continuously extruded and deformed by the Al2O3 grains under high temperature and pressure, followed by even wrapping of the Al2O3 grains. The BNMRs distributed between the Al2O3 grain boundaries reduced the atomic diffusion coefficient and inhibited the potential abnormal growth of Al2O3 grains. In this process, not only a special nuclear shell structure is formed, but also a good BN thermal conduction pathway is constructed, which better promotes the rapid conduction of heat.
The team published their review in the Journal of Advanced Ceramics on April 30, 2024.
"In this work, we prepared BNMR/Al2O3 composite ceramics, and during the sintering process, the pliable BNMRs were continuously extruded and deformed by the Al2O3 grains under high temperature and pressure, and as a result, not only did we form a special thermal conductivity pathway to enhance the thermal conductivity of the composites, but we also improved the mechanical properties of the Al2O3 ceramics, "said Ji-Lin Wang, first author of this new paper, associate researcher of the School of Materials Science and Engineering at Guilin University of Technology.
The BNMRs/Al2O3 composite ceramics composed of 3-4 um Al2O3 and 1-2 um BNMRs powders showed good overall performance, and for 5 wt% content of BNMRs composite ceramics, the relative densities, hardness, fracture toughness, and flexural strengths, respectively, were 99.95%±0.025%, 34.11±1.5 Gpa, 5.42±0.21 MPa·m1/2, and 375±2.5 MPa, and the thermal conductivity and dielectric constant were 6.18±0.02 and 15.89±0.13 W/(m·K), respectively. The fracture toughness, bending strength and thermal conductivity increased by 35%, 25% and 45.6%, respectively, compared with the corresponding values for pure Al2O3 ceramics.
The results of this study are promising to provide new experimental and theoretical references for improving the overall performance of high thermal conductivity alumina-based ceramic substrates.
The next work plan is to further improve the comprehensive performance of alumina Al2O3 based composite ceramic packaging substrates by introducing multiphase particles, whiskers or fibers to meet the needs of the latest electronic information technology development.
Other contributors include Dongping Lu, Weiping Xuan, Yuchun Ji, Shaofei Li, Wenbiao Li, Shilin Tang, Guoyuan Zheng and the corresponding author Prof. Fei Long from Guilin University of Technology in Guilin, China; and Ruiqi Chen form the Department of Civil and Environmental Engineering at Hong Kong Polytechnic University.
This work was supported by the National Natural Science Foundation of China (No.52262010), the Guangxi Natural Science Foundation of China (No.2023GXNSFAA026384), and the Guilin Scientific Research and Technology Development Program (No.2020011203-3).
About Journal of Advanced Ceramics
Journal of Advanced Ceramics (JAC) is an international journal that presents the state-of-the-art results of theoretical and experimental studies on the processing, structure, and properties of advanced ceramics and ceramic-based composites. JAC is Fully Open Access, monthly published by Tsinghua University Press on behalf of the State Key Laboratory of New Ceramics and Fine Processing (Tsinghua University) and the Advanced Ceramics Division of the Chinese Ceramic Society, and exclusively available via SciOpen. JAC has been indexed in SCIE (IF = 16.9, top 1/28, Q1), Scopus, and Ei Compendex.
About SciOpen
SciOpen is a professional open access resource for discovery of scientific and technical content published by the Tsinghua University Press and its publishing partners, providing the scholarly publishing community with innovative technology and market-leading capabilities. SciOpen provides end-to-end services across manuscript submission, peer review, content hosting, analytics, and identity management and expert advice to ensure each journal's development by offering a range of options across all functions as Journal Layout, Production Services, Editorial Services, Marketing and Promotions, Online Functionality, etc. By digitalizing the publishing process, SciOpen widens the reach, deepens the impact, and accelerates the exchange of ideas.
