Revolutionary Mass-Production Method for Polymer Electrolytes Unveiled

Abstract

Solid polymer electrolytes (SPEs) have emerged as promising alternatives for enhancing the safety features of lithium-ion batteries (LIBs) while remaining compatible with established LIB manufacturing processes. However, a persistent challenge has been the relatively limited yield achieved via traditional fabrication techniques such as solution casting and doctor blade methods. In this study, we present a novel strategy to produce extensive and uniform films of solid polymer electrolytes using a ferroelectric polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE) polymer. This approach employs horizontal centrifugal casting (HCC), a technique hitherto unutilized for SPE production. The substantial centrifugal forces generated during the HCC process yield SPE films characterized by uniform thickness across the surface and elevated ionic conductivity at ambient temperature. Compared to conventional solution casting techniques, the Li//Li cell featuring the SPE derived from HCC manifests stable electrochemical performance and increased cycle endurance. Additionally, a full cell incorporating a Li iron phosphate cathode displays consistent electrochemical behavior at room temperature. Notably, a 3 × 4 cm2 pouch cell maintains its performance attributes even under mechanical stress conditions such as folding and punching. These findings underscore the potential effectiveness of employing the HCC method in the development of high-performance SPE-based LIB systems.

A research team, led by Professor Seok Ju Kang in the School of Energy and Chemical Engineering at UNIST, has unveiled a groundbreaking technique for mass-producing polymer solid electrolytes, crucial components in batteries.

Departing from the traditional melt casting method, the team introduced a horizontal centrifugal casting method to overcome existing limitations. This innovative approach has redefined the production process for high-quality polymer solid electrolytes, revolutionizing the industry.

Figure 1. Depiction of the fabrication process for HCC-derived SPE, utilizing a custom apparatus accompanied by digital images of both the HCC and SPE films.

Drawing inspiration from the horizontal centrifugal casting technique used in producing iron pipes, the research team successfully achieved a uniform polymer solid electrolyte by rotating the solution horizontally during manufacturing. This method ensures minimal raw material wastage and offers superior electrochemical performance, economic feasibility, and effectiveness compared to conventional methods.

Professor Kang commented, "By adapting the iron pipe manufacturing process, we have developed a method capable of mass-producing uniform and high-performance solid electrolytes."

The newly developed technology enables a remarkable 13-fold increase in production speed by eliminating the need for drying polymer solutions and vacuum heat treatment, thereby streamlining the manufacturing process significantly.

Moreover, the production volume can be easily adjusted by varying the size of the horizontal centrifugal casting cylinder, ensuring consistent thickness and surface quality of polymer solid electrolytes, ideal for battery production.

Figure 2. Cross-sectional SEM micrographs comparing SPE films produced via solution casting (top) and HCC methods (bottom).

Lead author Hyunwoo Kim from the School of Energy and Chemical Engineering at UNIST stated, "Through this method, we have achieved enhanced battery stability and performance without altering the material composition."

Professor Kim emphasized, "The elimination of the time-consuming and energy-intensive vacuum heat treatment process is a key aspect of this study, enabling efficient mass production of polymer solid electrolytes."

Figure 3. (a) Chronopotentiometric plots comparing solution-cast (black) and HCC-derived (orange) SPE films in Li//Li symmetric cells at fixed current densities of 0.15 mA cm−2. Rate capabilities for (b) solution-cast and (c) HCC-derived SPE films in Li//Li symmetric cells, evaluated across a range of current densities from 0.01 to 0.20 mA cm−2. (d) Schematic representation of a 2032-type coin cell comprising an LFP cathode and a Li anode, incorporating HCC-derived SPE. Cycling endurance of 2032-type coin cells incorporating solution-cast (black dots) and HCC-derived (orange dots) SPE at C-rates of (e) 0.5 and (f) 1.0.

The research findings have been published in the online version of Energy Storage Materials on February 13, 2024. This research has been supported by the National Research Foundation of Korea (NRF), the Korea Institute of Energy Technology Evaluation and Planning (KETEP), and the Ministry of Science and ICT (MSIT).

Journal Reference

Hyunwoo Kim, Jihye Kim, Juho Lee, et al., "High-performance solid-state Li-ion batteries enabled by homogeneous, large-area ferroelectric PVDF-TrFE solid polymer electrolytes via horizontal centrifugal casting method," Energy Storage Mater., (2024).